Fernbedienung Logitech Harmony Smart Control/lircd.conf

Aus easyVDR-Wiki
Zur Navigation springen Zur Suche springen

lircd.conf für Fernbedienung Logitech Harmony Smart Control

# lircd.conf - Configuration for Atric IR-Wakeup-USB
#
# brand:          Logitech Harmony Smart Control
# model:          LH_SC_VDR25 (Configuration: KLS VDR 1.6)
# receiver:	  IR-WakeupUSB
#
# remark:   easyVDR V2.5 Logitech Harmony Smart Control (KLS VDR1.6)
#
#----------------------------------------------------------------------------
# ATTENTION! Do NOT use "irrecord" to automaticly learn key-codes
# This will generate wrong remote settings with the IR-WakeupUSB!
#
# Manually fill in key-names and key-codes in the "codes section" or
# use the "lircd.conf"-tool of the IR-WakeupUSB configuration software
#
#----------------------------------------------------------------------------
# Do NOT change the following remote settings
# These settings depends on the IR-WakeupUSB and are independent from
# the used remote control.
#
# You can change the name of the remote control to assign the file to the
# remote control.
# You can also add your own remarks (use the remark tag "#").
#----------------------------------------------------------------------------
# Atric_FB_Name_Str="LH_SC_VDR25"
# Atric_FB_Conf_Str="01050E0000000C00020215132A280000000000000000000000007F000000000000FF2400800500000000"
# Atric_FB_Pwr_On_0="47A88B05" (Schaltaktion=4-Zeichen-Wert=2 Zeichen des FB-Codes)
begin remote

  name            LH_SC_VDR25
  bits            48
  flags           SPACE_ENC
  eps             30
  aeps            100
  one             0  0
  zero            0  0
  pre_data_bits   16
  pre_data        0xFFFF
  post_data_bits  0
  post_data       0x0
  gap             65536
  repeat_bit      0
  toggle_bit_mask 0x0


#----------------------------------------------------------------------------
# Here (after the "begin codes" tag) fill in the keycodes (one key per row)
# Use the following syntax:
#
# KEY_1    0x03B800000000	# remark (optional)
#
# Description:	KEY_1:  the name of the remote button
#			for a full list of available key names use the
#			following command: "irrecord --list-namespace"
#
#       0x3B800000000:  IR-code of the remote button (48-bit hexcode)
#
#	     # remark:  optional remark for teh named key
#			this remark will be showed in the "lircd.conf"-tool
#			of the configuration software
#----------------------------------------------------------------------------


  begin codes

    KEY_REWIND               0xB20500000000      # Taste Rueckwaerts spulen
    KEY_PLAY                 0xB50500000000
    KEY_FASTFORWARD          0xB40500000000      # Taste Vorwaerts spulen
    KEY_RECORD               0xB70500000000
    KEY_PAUSE                0xB30500000000
    KEY_STOP                 0xB60500000000
    KEY_RED                  0xC00500000000
    KEY_GREEN                0xC10500000000
    KEY_YELLOW               0xC20500000000
    KEY_BLUE                 0xC30500000000
    KEY_EPG                  0xCB0500000000      # Taste Guide
    KEY_INFO                 0xCC0500000000
    KEY_MENU                 0xC90500000000
    KEY_VOLUMEUP             0x000000000000
    KEY_VOLUMEDOWN           0x000000000000
    KEY_LEFT                 0xC60500000000
    KEY_UP                   0xC40500000000
    KEY_OK                   0xC80500000000
    KEY_DOWN                 0xC50500000000
    KEY_RIGHT                0xC70500000000
    KEY_CHANNELUP            0xA00500000000
    KEY_CHANNELDOWN          0xA10500000000
    KEY_MUTE                 0x000000000000
    KEY_BACK                 0xA20500000000
    KEY_1                    0x810500000000
    KEY_2                    0x820500000000
    KEY_3                    0x830500000000
    KEY_4                    0x840500000000
    KEY_5                    0x850500000000
    KEY_6                    0x860500000000
    KEY_7                    0x870500000000
    KEY_8                    0x880500000000
    KEY_9                    0x890500000000
    KEY_0                    0x800500000000
    KEY_POWER                0x8C0500000000
    KEY_TEXT                 0x000000000000

  end codes

end remote